Views: 0 Author: Site Editor Publish Time: 2022-09-16 Origin: Site
At present, HDPE geomembranes are more and more commonly used in building construction, thus the demand in the market is relatively large. There is a difference in the process and quality from one manufacturer to another. Therefore, customers should pay attention to the model size of HDPE geomembranes when they go shopping in the market, as there are differences in the quotation for different sizes. So how to buy an HDPE geomembrane correctly?
Here is the content list:
Different production processes of HDPE geomembranes
How to maintain HDPE geomembrane?
HDPE geomembraneshave different production processes. One of them is the blown film process. The blown film process is a one-step forming method where the rough surface of the geomembrane is formed by blowing nitrogen gas and the finished product is a monolith. The flat extrusion process is a two-step forming method that produces a glossy geomembrane first and then forms a rough surface on the glossy surface by spraying rough particles. So why produce a glossy surface first and then spray rough? This is to make the geomembrane performance more stable so that the service life of the produced textured HDPE geomembrane is almost the same as that of the glossy surface. And the coefficient of friction of the geomembrane of the second spraying rough is also a bit higher than the rough surface blown out at once. HDPE geomembranes made by different production processes have their characteristics, which depend on the application scenario of the geomembrane.
In construction, each work type is strictly forbidden to reverse the process operation should be, should cooperate closely and arrange the process reasonably. First of all, we should continuously improve our operation skills, operate strictly according to the construction procedures, adhere to the inspection of each process, and avoid rework.
Secondly, we should strictly assess the production and installation construction by the material consumption quota, and implement the quota material collection system. Not only that, set up a material storehouse at the construction site, and strictly check the incoming materials, strengthen the security, prevent the loss, and strictly prohibit smoke and fire.
Thirdly, the installation construction required for measuring alignment, structural repair, and other work should be carried out in advance of the installation construction. HDPE geomembrane finished product protection measures are mainly these, we must carry out the correct operation, only then its performance can be fully protected, to bring us better benefits.
If you want to know more about HDPE Geomembrane, please visit our company's official website. Our company's official website is https://www.yfgeosynthetics.com/. We are ready to answer all your questions about HDPE Geomembranes. We will be glad to provide you with better service, high-quality products, and competitive prices!
